CLEAR AND CALL IN

Volume and weight: 50ml glass jar, 27 g

Portions per jar: 66 - 72

Burn Time on Charcoal: 200+ minutes

Burn Time with Electric Burner: 222+ hours

TOP NOTES: A duo of Frankincense species open the channel to our ancestral relations and guides and offer a bridge to the spiritual side of seemingly material matters.

HEART NOTES: A selective range of Copal to guard the gates while clearing and opening to prepare for reception. Woven with the resin of mystical holy wood, Palo Santo, a forcefield to ground and protect, with a specific quality of clearing that allows for naturally balance to be restored.

BASE NOTES: Siberian Cedar resin from ancient trees known to generate an audible, ringing frequency, with a powerful capacity to clear and cleanse space by raising frequency. Norway Spruce offers a distinctly grounded clearing, with protections from unwanted influences, that notably makes way for regeneration and regenerative power. North American Trementia Piñon offers a quality of drawing out energetic debris to clear it and make way for a generative field.

>> After cleaning or organizing your physical space

>> To clear space and busy energy to drop into a creative, meditative or productive flow

>> To dissolve looping, stuck and heavy energy and invite intentional energy

>> To dissipate thoughts and patterns that obscure clear seeing and knowing

>> Use to help calm, ground and ease restless states of mind and body

>> To make way for new energy and repatterning

>> To clarify and call in intentions, direction and focus

>> To open the pathway for creativity and explorations, receptivity and reflection

How to Burn Ritual Resin Incense on Charcoal

1. Light a tablet of charcoal using a torch lighter or by holding the tablet with metal tongs over a flame. Quick-lighting charcoal needs only a few seconds to ignite. Japanese charcoal may need up to 30 seconds of exposure to the flame.) 
2. Set charcoal on the screen of a brass burner or on a small mound of sand or ash.
3. Allow ignited charcoal to stand until fully active.
   Quick-light charcoal will become fully alive in 2-3 minutes. With quick-light charcoal, allow this in a well-ventilated place or outside to let impurities to burn off.
   Japanese charcoal will become fully alive in 8-10 minutes.
4. Gently blow on the coal to see it is entirely alive.
5. Once coal is fully active, welcome the resin blend and place a small amount on top of the coal.